3G WCDMA Kit Cellular Repeater Cell Phone Booster Outdoor Omni Antenna

المعلومات الأساسية
مكان المنشأ: الصين
اسم العلامة التجارية: GREETWIN
إصدار الشهادات: SGS, ISO9001,CE,ROHS
رقم الموديل: GW-23W-H
الحد الأدنى لكمية: 1 قطع
الأسعار: Negotiable
تفاصيل التغليف: كرتون مع رغوة البولي ايثيلين
وقت التسليم: 3 أيام عمل بعد استلام الدفع
شروط الدفع: T / T ، L / C ، ويسترن يونيون ، موني جرام
القدرة على العرض: 5000 قطعة شهريا
Product Name: GSM 900MHz Mobile Phone Signal Booster Frequency range: GSM900
Gain: 65dB Center Frequency Adjustment Step: 200KHz
Power Consumption: ≤8W RF Connector: N-Female
Origin: Shenzhen Output: 15dBm
Bandwidth: 20MHz or 15MHz Weight: < 1.5 Kg
تسليط الضوء:

N Female Cell Phone Booster,Outdoor Omni Antenna Cell Phone Booster,GSM900 3G Cellular Repeater


Outdoor Omni Antenna Cell Phone Booster


GSM900 3G Cellular Repeater

Product Description

1,Product Details.jpg

Cell Phone Booster 3G WCDMA Kit Cellular Repeater Outdoor Omni Antenna

Frequency Range Uplink Downlink
3G 2100 1920 - 1980MHz 2110 - 2170MHz
Max. Gain 70dB 75dB
Max. Output Power 20dBm 23dBm
Band width Wide Band
Manual Gain Control 31dB / 1dB Step
Automatic Gain Control >30dB
Ripple in Band ≤ 8dB
Noise Figure ≤ 6dB
VSWR ≤ 2.0
Intermodulation Products 9KHz~1GHz ≤ -36dBm
1~12.75GHz ≤ -30dBm
Spurious Emission 9KHz~1GHz ≤ -36dBm
1~12.75GHz ≤ -30dBm
Time Delay ≤ 1.5 μs
Frequency stability ≤ 0.01ppm
MTBF > 50000 hours
Impedance 50 ohm
Power Supply AC 90-264V,DC 9V/3A
Power LED Power indicator
ISO(Alarm LED) Red Self oscillation or Strong input signal
Green Normal
Mechanical Specification
RF Connector N-Female
Switch Power Switch
Cooling Heatsink Convection cooling
Humidity < 90%
Operating Temperature -20°C ~ +55°C
Environment Conditions IP40
Installation Type Wall Installation
Size 170mm×126mm×21mm
Weight < 1.5Kg

3G WCDMA Kit Cellular Repeater Cell Phone Booster Outdoor Omni Antenna 1

Product Manual

 Indoor Signal Repeater (Signal Booster) series is an ideal solution for wireless system in small/medium businesses and home users looking to enhance indoor wireless connectivity. It is connected via coaxial cable to Donor Antenna and Service Antenna, Donor Antenna is placed outside the building where it has easy access to BTS signal, and the Service Antenna is placed in the building where it can extend radio coverage to the blind area. And Automatic Gain Control (AGC) to avoid the Booster from over saturation, therefore maintaining a high voice quality and avoid adding interference to network. With good looking & super compact design also make it attractive. Besides, it is easy installation feature is also for individual customers to install the booster by themselves, and it does not need much professional knowledge and instrument. The dual band improves mobile signals with no negative impact on human health.


1. Cost effective solution for weak signal zones, reduce drop/off calls.
2. Compact size, low power consumption, easy installation, great cover.

Expansion and extending of the signal of base station.

Optimization of the quality of the signal and source
3. Cover about 3000~6000m² without block or obstruct.
4. High linear design, ALC function design, low interference to BTS.
5. Support any cellular devices (voice & data & video)
6. Wide band signal booster, or customize selective band booster.


Digital Display Panel, Intelligent mode setting
Smart function called which can be activated via the digital display panel.
Users can choose gain and working system by LED Digital Panel.

Set the technical parameters simple and efficient, this is easier than DIP Switch.

Standard Package

1) AC90-264V, DC 9V/5A power supply adapter 1PCS
2) AC power cord (EU/US/UK/SA/China standard, etc) 1PCS
3) Installation kit 1PCS
4) User manual 1PCS

Application Diagram




Company Information

5,Company Information.jpg



6,Exhibition and customers.jpg 



Packing and Shipping

8,Packing and Shipping.jpg 



      Q1. Why is there still no signal after installing the equipment?

            1. Check the power on booster and power supply.

            2. Check the connector of outdoor antenna is tight or not.

            3. Check the connectors of RF cable are tight or not.

            4. Check the outdoor signal is strong enough or not.

            5. Check to make sure the antenna is installed correctly.

            6. Check the connector of indoor antenna is tight or not.

            7. Check the cable type is suitable or not.


      Q2. Why the signal strength is too weak on the edge of area?

            1. Check the outdoor signal and antenna direction.

            2. Check booster is full gain or not.

            3. Check all of the connectors are tight.

            4. Change the location of outdoor/indoor antenna.

            5. Check the cable type is suitable or not.

            6. Deploy more indoor antennas.


      Q3. After running booster, why the signals are not stable?

            1. Checking the distance between donor antenna and server antenna are too close to each other? Check LED

                of booster to

                make sure alarms are green.

            2. Checking the signals from donor antenna whether to be stable or not?

            3. Connect the system again if it is incorrect connection.


      Q4. Why the booster power LED is not bright?

            1. Checking the input AC power range indicated on power adapter whether is corresponding to the local

                power system.

            2. Checking the power adapter whether connect the equipment correctly and stably or not.

            3. Checking the power adapter whether damage or not. To test output voltage whether be corresponding to

                that indicated on power adapter or not by multimeter


تفاصيل الاتصال

رقم الهاتف : +8615112267605

ال WhatsApp : +8615112267605